Hydraulic Crimper CT15

The CT15 is available with a Burndy style Y46 head which will allow the use of Burndy “P” type dies. With the appropriateie holders, the CT15 can also accept “U” type dies. The CT15 provides a crimping force of 15 tons/13,600 kg.

Stanley “CT” Crimpers are the original low pressure crimping tools that offer many advantages over hand pump, battery and high pressure crimpers:

•  5 – 10 times faster than battery or high pressure tools
• Easier, quicker and less labor intensive to use than hand pump or pop tool
• Operate from truck system pressure – no high pressure intensifi er required
• An accurate built in pressure relief ensures that a full die load is achieved at
• the minimum 1650 psi and prevents over crimping if higher pressure is present
• Patented open center/closed center selector that permits use on either type of hydraulic system. Easy and accurate adjustment can be made with common tools
• Double Acting. This means that you have pressure to crimp and pressure to retract the ram which eliminates die “hang-up” on the connector. Double acting also means quicker crimps than with battery or high pressure tools which are singleacting spring return • Continuous 360° rotation for easy crimp alignment
• Work at all temperatures. Won’t die in the cold or slow down in the heat
• Reverse-flow check valve to prevent operation if tool is plumbed backwards