**All prices are Ex GST**
The SM50 Sump Pump is a submersible, centrifugal type pump that requires no priming.
It has the capacity to draw down water to a depth of 3.5 inches and can handle water containing up to 10% solids.
Features
| Capacity |
- The SM50 can draw down water to a depth of 3.5 inches
- Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump.
- The pump will handle clear water and water containing up to 10% solids.
|
| Motor |
- Ccontaminant-tolerant gear motor uniquely designed for continuous highspeed operation.
- Drives the impeller directly meaning there are no spindle bearings that require periodic lubrication or replacement.
|
| Run Dry |
A series of seals on the drive shaft effectively keep hydraulic fluid and pumped water where they belong while allowing the pump to be run dry without sudden seal failure.
|
| Ease of Use |
-
The SM50 is fitted with dripless flatfaced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system.
-
The water outlet is 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting.
|
| Maintenace |
- Access to the pumping chamber for cleaning requires the removal of only two capscrews.
- The motor with the impeller attached is then easily removed from the pump casing.
|
| Durable |
The cast stainless steel, semi-closed impeller resists corrosion.
|
| Filter |
The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump.
|
Specifications
| Outlet Size |
3 - inch NPT / 3 - inch Camlock |
| Output Capacity |
1890 lpm |
| Weight |
9.5 kg |
| Length |
26.7 cm |
| Width |
25.4 cm |
| Input Pressure |
69 – 138 bar |
| Input Flow Range |
26 – 45 lpm |
| Porting |
- 8 SAE ¾-16 Straight Thread |
| Connector |
3/8 Flush-face HTMA Coupler |
Comparison
Compare specifications of submersible pumps:
Downloads
SM50 Sump Pump Spec Sheet
SM50 Sump Pump User Manual
SM50 Parts breakdown
Features
| Capacity |
- The SM50 can draw down water to a depth of 3.5 inches
- Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump.
- The pump will handle clear water and water containing up to 10% solids.
|
| Motor |
- Ccontaminant-tolerant gear motor uniquely designed for continuous highspeed operation.
- Drives the impeller directly meaning there are no spindle bearings that require periodic lubrication or replacement.
|
| Run Dry |
A series of seals on the drive shaft effectively keep hydraulic fluid and pumped water where they belong while allowing the pump to be run dry without sudden seal failure.
|
| Ease of Use |
-
The SM50 is fitted with dripless flatfaced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system.
-
The water outlet is 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting.
|
| Maintenace |
- Access to the pumping chamber for cleaning requires the removal of only two capscrews.
- The motor with the impeller attached is then easily removed from the pump casing.
|
| Durable |
The cast stainless steel, semi-closed impeller resists corrosion.
|
| Filter |
The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump.
|
