Hydraulic Crimper CT10
The CT10 is available in 4 models furnished with one of the following heads: Burndy Style Y35 head; Kearney Style PH2 head; Burndy Style Y750 head with 1-1/2 inch opening; Kearney Style WH3 head with 1-1/2 inch opening. The CT10 provides a crimping force of 11 or 12 tons / 10,000 or 10,900 kg depending on the model.
Stanley “CT” Crimpers are the original low pressure crimping tools that offer many advantages over hand pump, battery and high pressure crimpers:
-
5 – 10 times faster than battery or high pressure tools
-
Easier, quicker and less labor intensive to use than hand pump or pop tool
-
Operate from truck system pressure – no high pressure intensifi er required
-
An accurate built in pressure relief ensures that a full die load is achieved at
-
the minimum 1650 psi and prevents over crimping if higher pressure is present
-
Patented open center/closed center selector that permits use on either type of hydraulic system. Easy and accurate adjustment can be made with common tools
-
Double Acting. This means that you have pressure to crimp and pressure to retract the ram which eliminates die “hang-up” on the connector. Double acting also means quicker crimps than with battery or high pressure tools which are singleacting spring return • Continuous 360° rotation for easy crimp alignment
-
Work at all temperatures. Won’t die in the cold or slow down in the heat
-
Reverse-flow check valve to prevent operation if tool is plumbed backwards
Specifications
Application: | Hydraulic powered crimping of electrical connections that require 12 tons of crimping force |
Capacity: | Varies by model number. |
Hyd. Flow: | 3-9 gpm / 11-34 lpm |
Pressure: | 1650-2500 psi / 114-172 bar |
Weight: | 17 lbs / 7.7 kg |
Length: | 22 in. / 57 cm |
Width: | 7 in. / 18 cm |
Connection: | 3/8 in. male pipe adapter to -8 SAE port |