Sump Pump SM50


Please contact us if you are interested in this product.


**All prices are Ex GST**

The SM50 Sump Pump is a submersible, centrifugal type pump that requires no priming.

It has the capacity to draw down water to a depth of 3.5 inches and can handle water containing up to 10% solids.

Features
Capacity
  • The SM50 can draw down water to a depth of 3.5 inches
  • Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump.
  • The pump will handle clear water and water containing up to 10% solids.
Motor
  • Ccontaminant-tolerant gear motor uniquely designed for continuous highspeed operation.
  • Drives the impeller directly meaning there are no spindle bearings that require periodic lubrication or replacement. 
Run Dry

A series of seals on the drive shaft effectively keep hydraulic fluid and pumped water where they belong while allowing the pump to be run dry without sudden seal failure. 

Ease of Use
  • The SM50 is fitted with dripless flatfaced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system.

  • The water outlet is 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting. 

Maintenace
  • Access to the pumping chamber for cleaning requires the removal of only two capscrews.
  • The motor with the impeller attached is then easily removed from the pump casing. 
Durable

The cast stainless steel, semi-closed impeller resists corrosion. 

Filter

The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump.

Specifications
Outlet Size 3 - inch NPT / 3 - inch Camlock
Output Capacity 1890 lpm
Weight 9.5 kg
Length 26.7 cm
Width 25.4 cm
Input Pressure  69 – 138 bar
Input Flow Range  26 – 45 lpm
Porting - 8 SAE ¾-16 Straight Thread
Connector 3/8 Flush-face HTMA Coupler
Comparison

Compare specifications of submersible pumps:

Submersible Pump Comparision

Downloads

SM50 Sump Pump Spec Sheet

SM50 Sump Pump User Manual

SM50 Parts breakdown