Hose Types

The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hydraulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic Tools.
They are:

  • Certified non-conductive - constructed of thermoplastic or synthetic rubber inner tube, synthetic fiber braid reinforcement, and weather resistant thermoplastic or synthetic rubber cover. Hose labeled certified non-conductive is the only hose authorized for use near electrical conductors.

  • Wire-braided (conductive) - constructed of synthetic rubber inner tube, single or double wire braid reinforcement, and weather resistant synthetic rubber cover. This hose is conductive and must never be used near electrical conductors.

  • Fabric-braided (not certified or labeled nonconductive) - constructed of thermoplastic or synthetic rubber inner tube, synthetic fiber braid reinforcement, and weather resistant thermoplastic or synthetic rubber cover. This hose is not certified non-conductive and must never be used near electrical conductors

 

Oil Flow Each Hose Length Inside Diameter USE Wire Braid Hose Spec Working Pressure Fiber Braid Hose Spec Operating Pressure
GPM LPM FEET METERS INCH MM PSI BAR PSI BAR
5-8 19-30 0 up to 50 up to 15 1/2 13 Both SAE 100R17-8 3000 230 SAE 100R7-8 2000 140
5-8 19-30 0 51-100 15-30 5/8 16 Both SAE 100R17-10  3000 230 SAE 100R8-10 2750 190
5-8 19-30 100-300 30-90 5/8 16 Pressure SAE 100R2-10 2750 190 SAE 100R8-10 2750 190
        3/4 19 Both SAE 100R1-12 1250 86 SAE 100R7-12 1250 86
 

 


Read More:

Principle of Hydraulics

Open & Closed Centre Systems

Fluid Temperature

Flow Controls

Quick Disconnects