Hydraulic Crimper CT15

Hydraulic Crimper CT15

  • $8,550.00


The CT15 is available with a Burndy style Y46 head which will allow the use of Burndy “P” type dies. With the appropriateie holders, the CT15 can also accept “U” type dies. The CT15 provides a crimping force of 15 tons/13,600 kg.

Stanley “CT” Crimpers are the original low pressure crimping tools that offer many advantages over hand pump, battery and high pressure crimpers:

  •  5 – 10 times faster than battery or high pressure tools
  • Easier, quicker and less labor intensive to use than hand pump or pop tool
  • Operate from truck system pressure – no high pressure intensifi er required
  • An accurate built in pressure relief ensures that a full die load is achieved at
  • the minimum 1650 psi and prevents over crimping if higher pressure is present
  • Patented open center/closed center selector that permits use on either type of hydraulic system. Easy and accurate adjustment can be made with common tools
  • Double Acting. This means that you have pressure to crimp and pressure to retract the ram which eliminates die “hang-up” on the connector. Double acting also means quicker crimps than with battery or high pressure tools which are singleacting spring return • Continuous 360° rotation for easy crimp alignment
  • Work at all temperatures. Won’t die in the cold or slow down in the heat
  • Reverse-flow check valve to prevent operation if tool is plumbed backwards
Specifications
Application:.   Crimping connectors, terminals and lugs to electric power cable with 15 tons of force
Capacity:  500 MCM Copper, 1500 MCM Aluminum and 795 MCM ACSR 
Hyd. Flow:  3-9 gpm / 11-34 lpm 
Pressure:  1650-2500 psi / 114-172 bar 
Weight:  29 lbs / 13.2 kg 
Length:  29 in. / 74 cm
Width:  7 in. / 18 cm 
Connection:  3/8 in. male pipe adapter to -8 SAE port
Downloads

CT Crimping Tool Spec Sheet

CT15 Crimping Tool User Manual

CT15 Crimping Tool Parts Breakdown